Heat Treated Nickel Alloy Shaft Sealing Ring Turbo Filler Manure Mixer

Heat Treated Nickel Alloy Shaft Sealing Ring Turbo Filler Manure Mixer

• Nickel alloys used for ring joint gaskets often include Inconel, Monel, Hastelloy, and Nickel 200.
• Each material offers varying degrees of resistance to corrosion, heat, and pressure.

• Ring joint gaskets are made according to specific standards, such as API 6A for upstream oil and gas or ASME B16.20 for flange gaskets.
• They are available in different shapes like oval, octagonal, BX, and RX depending on the type of flange faces they are supposed to be mated with.

• These gaskets are suitable for high-pressure applications, often for pressure classes ranging from 150 to 2500 lbs or higher in API-rated flanges.
• The specific rating will be designated by the number stamped on the gasket, such as R-45, RX-45, BX-150 etc.

• Able to withstand temperature extremes due to the high melting points of nickel alloys.
• The temperature range for performance can typically be between cryogenic temperatures up to about 1000°C, depending on the specific alloy composition.

• Used in oil and gas production, refining, petrochemical processing, pharmaceutical, and chemical industries.

• Good mechanical properties under severe conditions.
• Resistance to many forms of deterioration, including, notably, corrosion and oxidation.

• These gaskets are installed between flanges and require proper bolting techniques for a metal-to-metal seal.
• Proper handling is critical to prevent damage to the gasket sealing surfaces.

Some Materials of Ring Type Joint Gasket

Heat Treated Shaft Sealing Ring

Nickel Alloy Shaft Sealing Ring

Shaft Sealing Ring Joint Gasket

Heat Treated Nickel Alloy Shaft Sealing Ring Turbo Filler Manure Mixer Images